Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Maintenance & Repair DVD/Entertainment Systems
397 messages, Last post on Sep 04, 2009 at 11:50 AM
You are in the Maintenance & Repair Forum. Your Host is mr_shiftright
On the multidisc changer there is a lead called IR enable. It is not clear if that is handled by the cable from the radio to the changer or if it goes to the video screen. Will have to look at that great wiring diagram.There is however another solution.You can buy a 6 disc multi changer part# P04685932AC which I believe is a 2002-2004 multi disc changer that fits the 2005-06 caravans. These changers have an RF transmitter on the outside of the metal casing. It plugs right into the radio with the cable part#4685999AC. Then all you need is the RF 900 Mhz (with SCAN button) headphones and you are done.If you can hook up an IR transmitter to those leads you identified and it works that would really rock. Let us all know.
|
|
|
Replying to: bbowman1 (Mar 11, 2007 3:13 pm) Thanks, Russ |
|
|
Replying to: bbowman1 (Mar 11, 2007 3:13 pm) I think the 10 pin connect may be close to the same as my 12 pin connector only has 10 wires to it. but not sure Hope this helps everyone! Final cost to me was $32 for the transmitter and about 3 hours total to install - taking my time to make it look good and verify wiring. |
|
|
Replying to: bbowman1 (Mar 16, 2007 11:55 am) |
|
I decided to use the RF type Multi-disc CD changer. I recevd the special cable betwen the radio and changer which included a seperate 2-pin cable bundles with it for power. I could not find a tucked away power connector near the radio to connect up to. Does anyone know the best place to connect power for the CD changer? Thanks.
|
|
|
Replying to: gwesdor (Mar 22, 2007 2:46 pm) Good luck.
|
|
|
Replying to: gwesdor (Mar 11, 2007 6:12 pm) I have a BIG PROBLEM. I have need this DVD Player P04685932AC but I must to know if it work with EUROPEAN DVD disc. Do you know the AREA REGION CODE for Dvd disc? in Europe we are in AREA REGION CODE 2 and our DVD player are ready for disc mastered: PAL, AREA REGION CODE FREE or REGION CODE 2 In USA you have: NTSC, AREA REGION CODE 1 all I have to know is if that Player can read our format, PAL and REGION 2. I know that other series of this player: Model NO. P05094033AC does't work here, only work with american Disc mastered NTSC AREA 1. Friend help me, I want to buy because I have monitor for my chrysler Voyager but please ask someone expert, in chrysler, or try yourself, insert an EUROPEAN DVD disc inside player, if it work I'm ready to.. and I will thank's for all of my live I'm sure that you know someone that can solve this problem, if you do not have, you can buy a DVD Film mastered PAL and REGION 2, anywere in a store, in internet or... I send you from ITALIA my film cause you try to see with your car sistem. For me it's very important. Help me please I wait answere. |
|
|
I have a 2004 Quest with an aftermarket DVD player (installed at purchase of van by dealer). When I bought it I lived in the Lehigh Valley and now live in south central PA. The radio station that the DVD player was set for was fine when I lived in Lehigh valley but now I get some interference in my current home and some of the roads we travel. Is it possible to set DVD player to play on a different radio station? How do you go about doing this? Unfortunately I do not have the brand name of the DVD player as there is none on the unit. Trust me I looked. Thanks for any help.
|
|
|
Replying to: dtownfb (May 09, 2007 12:54 pm) |
|
|
Replying to: mendigs (May 18, 2006 7:48 pm) In your picture you have a manual for that DVD system. I have the same system in my '05 and getting it running was problematic. After a wrong remote, etc., I found the correct remote and can only listen to the movies via 88.3 on the AM. It seems silly to me that there isn't an actual mode setting (like Satellite, FM, CD, etc) for the video sound that is actually hard-wired to the speakers rather than broadcast on a single channel that may have interference. Is that anywhere in your manual? Thanks if you see this, am nervous about small kids and loud headphones. |
|
You are here:
Forums
Maintenance & Repair DVD/Entertainment Systems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
Browse by Board
Browse by Topic
Today's Chats
