You are here: Forums Hatchbacks Honda Fit Honda Fit Accessories and Modifications

Honda Fit Accessories and Modifications

634 messages,  Last post on Aug 30, 2009 at 7:58 AM

You are in the Honda Fit Forum. Your Host is pf_flyer

What is this discussion about? Honda Fit, Performance Mods, Hatchback

Messages Page 24 of 64 1 ... 21 22 23 24 25 26 27 ... 64 Prev Next Last

Go To Msg # Search This Discussion

#225 of 634 Re: Jazz Armrest From Germany - Under $50 [shneor] by shneor Jul 01, 2006 (4:51 pm)
Replying to: shneor (Jun 07, 2006 6:30 am) Got the armrest and assembled it. The bottom is plastic, looks to be pretty sturdy, and has lots of room inside. It's not adjustable (unless you take it apart first). But one big problem: it installs using double-sided adhesive tape, which was NOT included in the package. I wrote them of ocurse, but have not yet had an answer. Otherwise, I like it even though it won't flip up. It does have a built-in plastic cupholder that pulls out in the back, and it will hold CD jewel cases (probably around 6). There's also a front compartment inside, which looks good for small change, matches, small pocketknife, pack of gum, etc. etc. Now to see if they send me the tape so I can actually use it... Replies to this message: shneor (Jul 06, 2006 6:48 am) nethawk7 (Jul 06, 2006 12:19 pm) nethawk7 (Jul 25, 2006 5:42 pm)
#226 of 634 Re: Jazz Armrest From Germany - Under $50 [shneor] by shneor Jul 06, 2006 (6:48 am)
Replying to: shneor (Jul 01, 2006 4:51 pm) So the vendor said that they would not send tape, and screw the armrest in. But no screws are supplied, and you can't screw it in without remoovint the front seats. I bought some double-sided foam tape and installed the 2mrest. So far, so good. Still easy to snap the seat belts in, and use the handbrake and shift. Replies to this message: nethawk7 (Jul 06, 2006 12:19 pm) nethawk7 (Jul 25, 2006 5:42 pm)
#227 of 634 Re: Jazz Armrest From Germany - Under $50 [shneor] by nethawk7 Jul 06, 2006 (12:19 pm)
Replying to: shneor (Jul 06, 2006 6:48 am) Photo?
#228 of 634 Footwell lighting by ilkirk Jul 07, 2006 (6:16 pm)
I know that this has been discussed (sort of) already, but I thought I'd bring it back up. In most of the preview for the Fit they mentioned a footwell lighting kit. However post release, all mention has disappeared and the kit doesn't seem to be available.   Now when I was initially looking at Civics a little while back I DID see the footwell lighting kit as an available accessory, so I did some digging.   At College Hills Honda, they list a "Courtesy Light" for the 2006 Civic Sedan/Coupe/Hybrid. (Part #08E10-SNA-110) Its pretty much what I imagined when I thought of the footwell lighting kit and I think the blue color would match the other light scheme well.   Does anyone have any guesses as to whether or not it might fit into the Fit? (Really, no pun... its just so tough!) Has anyone seen the footwell kit in a Jazz accessory list?
#229 of 634 Re: Roof Racks and Hitch mounts [lynivere] by christineq Jul 11, 2006 (7:41 pm)
Replying to: lynivere (May 13, 2006 2:30 am) I checked out the Maggie rack but the Melrose is the one for me. Does drilling into the roof and mounting them on the car invalidate the warrantee? The Melrose is a "disappearing roof rack": http://www.toplinemfg.com/html/rck-melroserack.html   Cq
#230 of 634 How to remove old gas cap by manlok Jul 12, 2006 (8:19 am)
For those who bought the locking gas cap, how did you guys remove the old cap?? Did you guys simply cut the wire connecting the cap and the small door or using other method? Since I want to retain the old cap in case I want to put it back later for any reason, but I found it difficult to take that wire out... help please... Replies to this message: kagedude (Jul 12, 2006 8:42 am) manlok (Jul 12, 2006 9:46 am) dewaltdakota (Jul 12, 2006 5:57 pm)
#231 of 634 Re: How to remove old gas cap [manlok] by kagedude Jul 12, 2006 (8:42 am)
Replying to: manlok (Jul 12, 2006 8:19 am) No cutting needed. Just push the pin out using a pen where the tether connects from (the gas lid). Replies to this message: manlok (Jul 12, 2006 9:46 am)
#232 of 634 Re: How to remove old gas cap [kagedude] by manlok Jul 12, 2006 (9:46 am)
Replying to: kagedude (Jul 12, 2006 8:42 am) I tried yesterday but seems it's not easy to push the pin out.... let me try it today later again
#233 of 634 Re: How to remove old gas cap [manlok] by dewaltdakota Jul 12, 2006 (5:57 pm)
Replying to: manlok (Jul 12, 2006 8:19 am) It was almost tooo easy for me to take mine off. I just took a 10 penny finishing nail, and used the head to push up on the pin from the underside. It popped right out, so be sure to catch yours, or at least note which direction it rolls in, as it hits the ground.
#234 of 634 Roof racks for the Fit by fitcanuck Jul 14, 2006 (9:24 pm)
I know there's been some discussion re: roof racks for the Fit (thanks drknife, johnnyb11, lynivere)... called a local roof rack company and there is nothing set up yet for the Fit. They quoted that they can do a custom Thule rack and mounts for appro $700 Cdn. Seems expensive to me. I will contact Honda Canada to see if there's anything coming out for the Fit. I've also read in this Forum that the max weight capacity for the Fit roof seems to be about 100 lbs. Is this right? Does anyone have any updated info? Like lynivere, I'm not keen to drill holes into my precious Fit. I'm wanting to install roof rack for kayaking. Appreciate any tips... Replies to this message: biobassman (Jul 17, 2006 9:12 am) mattschechter (Jul 17, 2006 1:10 pm) biobassman (Jul 24, 2006 10:39 am) bullchip (Jul 19, 2006 12:28 pm) biobassman (Jul 20, 2006 1:57 pm) masik03 (Jul 22, 2006 12:22 pm)

Messages Page 24 of 64 1 ... 21 22 23 24 25 26 27 ... 64 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Hatchbacks Honda Fit Honda Fit Accessories and Modifications